Discover ORCA® Rubrail profiles through our catalog describing the various shapes used for the RIB market.

Black #NRR7591600 / Neptune #NRR7582300

Specifications:                                      Packing:            

Width (mm)                            90           Coil mength      210 mtrs

Thickness (mm)                    12            Qty per box       210 mtrs

Weight per meter (kg/m)      0,47         Qty per pallet   840 mtrs

 

 

  

WAVE

Black #NRR7591001 / Neptune #NRR7592200

Specifications:                                       Packing:            

Width (mm)                            115          Coil mength      50   mtrs

Thickness (mm)                     3             Qty per box       600 mtrs

Weight per meter (kg/m)      0,45         Qty per pallet   600 mtrs

SHARK

Black #NRR7592600 / Neptune #NRR7591500 /

Artic Grey #NRR7591900

Specifications:                                       Packing:            

Width (mm)                            90           Coil mength      50   mtrs

Thickness (mm)                    25           Qty per box       150 mtrs

Weight per meter (kg/m)      0,97        Qty per pallet   300 mtrs

TUNNEL GREY

Neptune #NRR7593500

Specifications:                                        Packing:            

Width (mm)                            135          Coil mength      25    mtrs

Thickness (mm)                     40            Qty per box       50   mtrs

Weight per meter (kg/m)      1,6            Qty per pallet   100 mtrs

Specially developed to clean ORCA® fabrics. Discover our range of cleaning products.

Step 1 - New Magic cleaning instructions  : Cleans and removes surface dirt.

Use : New Magic is recommended for regular light-cleaning. If used more than on a regular bases, we recommend diluting with water.

 1 - Spray New Magic onto a wet tube.

2 - Clean and scrub with a non abrasive sponge.

3 - Rinse with clean water.

Step 2 - Use of Shmuffex :

Shmuffex properties  : Removes spots on the various layers of the fabric.

Use : Apply Shmuffex immediately after completing step1. Protect elements surrounding the tube. Wear gloves and protective clothing when handling this product (contains chlorine). Check the expiration date of product before use (risk of loss of effectiveness).

1 - Spray Shmuffex generously, the using a non-abrasive sponge, spread over the whole surface of the tube.

2 - Let it set for 1 hour and make sure it doesn't dry out.

3 - Rinse with clean water. Repeat the process if necessary.

Step 3 - Use of Gumemp 100 :

Properties of Gumemp 100 : Protects the fabric against salt, atmospheric agents, and UV rays, by creating a surface film.

Use : Gumemp 100 must be used after a regular cleaning (Step1) or  deep cleaning (Step 1 + Step 2). It is strongly recommended to perform a deep cleaning of the tube before placing your inflatable boat into long-term storage. This product must be appied on a perfectly clean and dry surface.

1 - Spray Gumemp 100 on the tube surface and spread evenly with a clean cloth. Wait for the product to completely dry and then polish it with a clean dry cloth.

2 - Before.

3 - After Step (1+2+3)

Pennel & Flipo develops several dissolutions to be used in diverse industries and for different bonding processes.

Feel free to contact us for your specific requirement.

The ORCA® Hardener improves adhesion strength of the  assemblies.

This Hardener developed especially for the bonding of Neoprene and Neoprene Chlorosulfonated Polyethylene water resistant materials, as used for inflatable floats and inflatable structures. When using neoprene glue, ORCA® GLUE, add 5% to 10% ORCA® HARNDENER RFE according to the quantity of ORCA® GLUE used. From 10 liters of mixed product, it is possible to improve the pot life of the adhesive by reducing the quantity of hardener to 5% in volume only.

Average characteristics :
Solvents : Ethyl Acetate
Color : Light yellow
NCO contents : Approximately 7,2%
Reactivity : Very hight
Package : Alu Tin - 800gr
Flammability : Flash point less than 21°C - Highly flammable
Storage : 12 months in its original sealed packaging stored in an environment at 18 ° C and ventilated
Cleaning: Neopren solvent

Processing :
The addition of ORCA® Hardener RFE improves significantly the adhesion, cohesion and mainly the heat resistance of the final bond. (Dilutable with hexane)

Specially designed for bonding of ORCA® fabrics.

Description :
• Polychloroprene Glue
• Hardenner RFE
• Primer : Ethyl Acetat
• Solvant : Methyl Ethyl Keton

STEPS :
•To Sand both sides
•To Put MEK (methyl ethyl keton)

Wait for 10 minutes
• To Put on both sides the special primer with a cloth
Attention :  not to use metallic tools and not to put the primer in the metallic containers

Wait for 20 minutes minimum
•To Add 10% of RFE in the glue (life time: about 30 minutes)
•To Put the first layer of glue on the both sides and wait for 12-15 minutes
•To Put the second layer of glue on the both sides and wait for 15 minutes
•To Press (cold press)

Glue Adhesion will be optimal in 48-72 hours